MZF-F87 MZ FORMULA 87 Body Shell Set (for KYOSHO MINI-Z Racer MR-03)

What's MZ FORMULA?

The Kyosho Mini-Z Racer MR-03 transforms into a formula car!

The concept behind MZ FORMULA is to attach a formula-type body to the Kyosho Mini-Z Racer MR-03 and enjoy a casual F1 experience.

The first release features a body that evokes the formula cars of the 1980s. The cute and cool body, designed by illustrator Mr. Alaburuka, is sure to make your RC life even more enjoyable!

GARAGE HIRO is supports this production.

Currently offering a launch discount!!

<Content>

Front Wing x1

Body x1

Rear Wing x1

Driver's Helmet (with mounting screws) x1

* Each part is unpainted. Please paint them in your favorite colors and enjoy.

* Compatible with the Kyosho Mini-Z Racer MR-03 (RM) with the S wheelbase.

* Compatible with W (wide) front width.

* The dedicated wheels are sold separately (MZF-W01F/W01R). Please use the tires for Kyosho Mini-Z Racer.

* Can be equipped with an IC tag.

* This product is not an official Kyosho product.

<Information>

Recommended tires:

Front - MZW39-30 Mini-Z Low Height Slick Tires 30° (4 pieces, W tire specification with 2 tires used on one wheel).

Rear - MZW17-20(B) Wide Tire Set (20°, 4 pieces, W tire specification with 2 tires used on one wheel).

<Notice>

Although high toughness resin materials are used at the time of release, please note that the strength is lower compared to ABS and similar materials, and it is prone to cracking when exceeding the bending limit.

Since the product is produced by 3D printing, there may be support materials and traces remaining. Please remove them before use.

Due to the manufacturing process with a 3D printer, there may be slight dimensional errors. Please note that some processing may be required for installation.

The main material is UV resin, so please avoid direct sunlight and storage/use at high temperatures (above 40 degrees Celsius).

The image is under development, and the specifications of the product may change.

The product specifications are subject to change without notice.

- Manufacturing method: 3D printing

- Material: High toughness resin

Planning and operation: MZ FORMULA PROJECT

Official website: https://www.facebook.com/profile.php?id=61556884791844

Publisher: enjoy smile Co. Web:https://enjoysmile.co.jp/

MZF-W01F Wheel Type A, Front - Set of 2 (for MZ FORMULA)

<Content>

Front Wheel x 2

 
＊The parts are unpainted. Please paint them in your preferred color and enjoy.

＊Tires purchased separately

＊Please use tires specifically designed for Mini-Z racers.

<Information>

Recommended Tires:

[Front]

MZW39-30 Low-Height Slick Tires (30°) - Set of 4

W-Tire configuration, where 2 tires are used on each wheel

* To install, a 4.5mm box wrench capable of removing and attaching nuts in a deep position is required.

  Example: Mini-Z Racer 4.5mm Box Driver (Mini-Z Tool)

<Notice>

Although high toughness resin materials are used at the time of release, please note that the strength is lower compared to ABS and similar materials, and it is prone to cracking when exceeding the bending limit.

Since the product is produced by 3D printing, there may be support materials and traces remaining. Please remove them before use.

Due to the manufacturing process with a 3D printer, there may be slight dimensional errors. Please note that some processing may be required for installation.

The main material is UV resin, so please avoid direct sunlight and storage/use at high temperatures (above 40 degrees Celsius).

The image is under development, and the specifications of the product may change.

The product specifications are subject to change without notice.

- Manufacturing method: 3D printing

- Material: High toughness resin

Planning and operation: MZ FORMULA PROJECT

Official website: https://www.facebook.com/profile.php?id=61556884791844

Publisher: enjoy smile Co. Web:https://enjoysmile.co.jp/

MZF-W01R Wheel Type A, Rear - Set of 2 (for MZ FORMULA)

<Content>

Rear Wheel x 2

 
＊The parts are unpainted. Please paint them in your preferred color and enjoy.

＊Tires purchased separately

＊Please use tires specifically designed for Mini-Z racers.

<Information>

Recommended Tires:

[Rear]

MZW17-20(B) Wide Tires (20°) - Set of 4

W-Tire configuration, where 2 tires are used on each wheel

* To install, a 4.5mm box wrench capable of removing and attaching nuts in a deep position is required.

  Example: Mini-Z Racer 4.5mm Box Driver (Mini-Z Tool)

<Notice>

Although high toughness resin materials are used at the time of release, please note that the strength is lower compared to ABS and similar materials, and it is prone to cracking when exceeding the bending limit.

Since the product is produced by 3D printing, there may be support materials and traces remaining. Please remove them before use.

Due to the manufacturing process with a 3D printer, there may be slight dimensional errors. Please note that some processing may be required for installation.

The main material is UV resin, so please avoid direct sunlight and storage/use at high temperatures (above 40 degrees Celsius).

The image is under development, and the specifications of the product may change.

The product specifications are subject to change without notice.

- Manufacturing method: 3D printing

- Material: High toughness resin

Planning and operation: MZ FORMULA PROJECT

Official website: https://www.facebook.com/profile.php?id=61556884791844

Publisher: enjoy smile Co. Web:https://enjoysmile.co.jp/

MZF-F87-1 MZ Formula F87 Front Wing

<Content>

Front Wing x1

 ＊The parts are unpainted. Please paint them in your preferred color and enjoy.

<Information>

Spare Parts for F87 body shell.

<Notice>

Although high toughness resin materials are used at the time of release, please note that the strength is lower compared to ABS and similar materials, and it is prone to cracking when exceeding the bending limit.

Since the product is produced by 3D printing, there may be support materials and traces remaining. Please remove them before use.

Due to the manufacturing process with a 3D printer, there may be slight dimensional errors. Please note that some processing may be required for installation.

The main material is UV resin, so please avoid direct sunlight and storage/use at high temperatures (above 40 degrees Celsius).

The image is under development, and the specifications of the product may change.

The product specifications are subject to change without notice.

- Manufacturing method: 3D printing

- Material: High toughness resin

Planning and operation: MZ FORMULA PROJECT

Official website: https://www.facebook.com/profile.php?id=61556884791844

Publisher: enjoy smile Co. Web:https://enjoysmile.co.jp/

MZF-F87-2 MZ Formula F87  Rear Wing

<Content>

Rear Wing x1

 ＊The parts are unpainted. Please paint them in your preferred color and enjoy.

<Information>

Spare Parts for F87 body shell.

<Notice>

Although high toughness resin materials are used at the time of release, please note that the strength is lower compared to ABS and similar materials, and it is prone to cracking when exceeding the bending limit.

Since the product is produced by 3D printing, there may be support materials and traces remaining. Please remove them before use.

Due to the manufacturing process with a 3D printer, there may be slight dimensional errors. Please note that some processing may be required for installation.

The main material is UV resin, so please avoid direct sunlight and storage/use at high temperatures (above 40 degrees Celsius).

The image is under development, and the specifications of the product may change.

The product specifications are subject to change without notice.

- Manufacturing method: 3D printing

- Material: High toughness resin

Planning and operation: MZ FORMULA PROJECT

Official website: https://www.facebook.com/profile.php?id=61556884791844

Publisher: enjoy smile Co. Web:https://enjoysmile.co.jp/

MZF-F87-3 MZ Formula F87  Body Shell

<Content>

F87 Body Main Unit x1

＊The parts are unpainted. Please paint them in your preferred color and enjoy.

<Information>

Spare Parts for F87 body shell.

<Notice>

Although high toughness resin materials are used at the time of release, please note that the strength is lower compared to ABS and similar materials, and it is prone to cracking when exceeding the bending limit.

Since the product is produced by 3D printing, there may be support materials and traces remaining. Please remove them before use.

Due to the manufacturing process with a 3D printer, there may be slight dimensional errors. Please note that some processing may be required for installation.

The main material is UV resin, so please avoid direct sunlight and storage/use at high temperatures (above 40 degrees Celsius).

The image is under development, and the specifications of the product may change.

The product specifications are subject to change without notice.

- Manufacturing method: 3D printing

- Material: High toughness resin

Planning and operation: MZ FORMULA PROJECT

Official website: https://www.facebook.com/profile.php?id=61556884791844

Publisher: enjoy smile Co. Web:https://enjoysmile.co.jp/

MZF-H01 MZ Formula Helmet Type A （with Screw）

<Content>

Helmet x1

Mounting screws x1

＊The parts are unpainted. Please paint them in your preferred color and enjoy.

<Information>

Spare Parts for F87 body shell.

<Notice>

Although high toughness resin materials are used at the time of release, please note that the strength is lower compared to ABS and similar materials, and it is prone to cracking when exceeding the bending limit.

Since the product is produced by 3D printing, there may be support materials and traces remaining. Please remove them before use.

Due to the manufacturing process with a 3D printer, there may be slight dimensional errors. Please note that some processing may be required for installation.

The main material is UV resin, so please avoid direct sunlight and storage/use at high temperatures (above 40 degrees Celsius).

The image is under development, and the specifications of the product may change.

The product specifications are subject to change without notice.

- Manufacturing method: 3D printing

- Material: High toughness resin

Planning and operation: MZ FORMULA PROJECT

Official website: https://www.facebook.com/profile.php?id=61556884791844

Publisher: enjoy smile Co. Web:https://enjoysmile.co.jp/